This product contains sodium hypochlorite and sodium hydroxide which is very effective at removing tough stains from hard surfaces. It is a cleaner for walls and external hard surfaces which will leave your Render, Brick, Paving, Slabs, Stone or Concrete looking as good as new.
Directions For Use
Prior to application hose down any surrounding surfaces that you don’t want to treat with clean water. This would include plants, lawns, borders, window frames, etc.
Apply Restore Wash using a pump-up sprayer on to a small test area and leave for 5-10 minutes. Rinse off thoroughly and inspect when dry. If satisfied with the results then apply evenly over the whole area, leave 5-10 minutes and rinse off with clean water. Use a soft brush if necessary on stubborn or heavily contaminated areas. Reapply as above if required. Coverage: When used as directed 5 litres will be sufficient for 15-30 square metres. Suitable for use on stone paving, concrete, render, asphalt, timber and roof tiles.
Can cause severe skin burns and eye damage if not used correctly. May be corrosive to metals. Very toxic to aquatic life. Toxic to aquatic life with long lasting effects. Contact with acids liberates toxic gas. Wash hands thoroughly after handling. Wear protective gloves, clothing and eye protection. Avoid release into the environment. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing. Store locked up.